|
|
Meta-talc Application in Inorganic Materials
Bednárek, Jan ; Rovnaník, Pavel (referee) ; Palou, Martin (referee) ; Havlica, Jaromír (advisor)
This thesis is focused at possibilities of preparation and characterization of XRD-amorphous delaminated and dehydroxylated talc phase – meta-talc, which can have its potential application and a starter material for a preparation of magnesium-silicate analogues of geopolymers. Changes in structure and morphology of talc ore were observed during this work. For the purposes of this research, two various talc ores – chloritic and dolomitic were examined. Whole process of meta-talc preparation was examined with whole scale of instrumental techniques such as X-ray diffraction, simultaneous thermogravimetric a differential thermal analysis, infrared spectroscopy, scanning electron microscopy or laser analysis of particle size. Meta-talc can be obtained via mechanochemical activation of talc ore with subsequent calcination. Mechanochemical treatment lead to destruction of original crystal structure and breaking of original bonds, i.e. the product of this treatment was almost amorphous and delaminated. Most of hydroxyl groups were converted to molecules of water which remained adsorbed or coordinated in ore structure. These molecules were removed during calcination step.
|
|
|
Influencing the hydration of high-performance composites using zinc ions
Všetečka, Tomáš ; Hajzler, Jan (referee) ; Novotný, Radoslav (advisor)
The bachelor thesis is focused on the influence of hydration of high-performance cementitious composites, more specifically reactive powder composites. Zinc ions were supplied by the compounds of zinc oxide and zinc sulphate heptahydrate. Zinc ions were added by weight content to cement at concentrations of 0.2; 0.5 and 1.0 wt. %. The development of properties depending on the content of zinc ions and the type of compound used was monitored in this work. The measured values were compared with reference values that did not contain zinc ions. The highest compressive strengths were obtained with a sample containing 1.0% Zn in the form of zinc oxide. However, this sample is associated with a longer setting time due to the retarding effect of zinc ions on hydration. The retardation effect was monitored using isothermal calorimetry. For samples containing zinc ions, a negative effect on the brass layer of steel fibers, which was used as reinforcement, was observed. Due to the addition of zinc ions, dezincification and subsequent removal of brass from the surface of the fibers took place. Therefore, these specimens had lower tensile strengths. A positive effect on the differential ballistic protection efficiency factor was observed for a sample containing 1% Zn in the form of zinc oxide.
|
|
|
Influence of calcium sulphate type on hydration of Portland cement
Šimčíková, Ivana ; Šiler, Pavel (referee) ; Šoukal, František (advisor)
My bachelor thesis deals with the study of the influence of calcium sulphate types on the hydration of Portland cement. Hydration is performed at 15 °C, 25 °C and 40 °C. In the theoretical part we find a description of the hydration of Portland cement and the influence of the type and amount of gypsum on the hydration period. The experimental part contains the preparation of samples for measurement and the principle of calorimetry including a description of the calorimetric curve. The data obtained from the calorimetric curve was processed into ternary diagrams for illustration. The diagrams show that the more calcium sulphate is soluble, the shorter the induction period, the times of reaching the minimum heat flow and heat flow at the maximum silicate peak will have. Further, the diagrams showed that as the amount of water in sulphate increases, so does the amount of hydration heat released.
|
|
|
Rheology of Alkali-Activated Slag during Its Early Hydration Stages
Pazour, Miroslav ; Smilek, Jiří (referee) ; Bílek, Vlastimil (advisor)
This bachelor thesis focuses on the measurement of viscoelastic parameters of mixtures based on alkali-activated blast furnace slag during hydration. Hydration was monitored using isothermal calorimeter and initial and final setting time was determined for another comparsion by Vicat’s needle. These parameters were measured depending on activator dosage (water glass) and organic admixture dosage (hexylene glycol) and compared with each other. It was observed that storage modulus prevailed over loss modulus in fresh mixtures with lower dosage of activator, whereas in mixtures with higher dosage of activator viscous component began to prevail and complex modulus was rather descreasing. Conversely, in mixtures with higher hexylene glycol dosage complex modulus was significantly increasing. Evolution of modules in time correlated with calorimetric curves and setting times. During setting time, which is assigned to formation of primary C-A-S-H, values of viscoelastic parameters was remarkably increasing.
|
|
|
The influence of particle size and methods of preparation of calcium aluminate phases on their hydration
Ohaňka, Zdeněk ; Másilko, Jiří (referee) ; Koplík, Jan (advisor)
This work focuses on the hydration of four calcium aluminate phases – C3A, C12A7, CA and CA2. Above all, the influence of particle size and method of preparation on hydration behaviour were studied. Influence of these factors on hydration products were also investigated. Calcium aluminates were prepared by solid state synthesis and amorphous citrate method. Both methods were described in detail. The particle size was determined by laser diffraction. Isothermic calorimetry was used to investigate the process of hydration. Hydration products were identified by X-ray diffraction analysis and simultaneous thermogravimetric and differential thermal analysis.
|
|
|
Influencing the hydration of high-performance composites using zinc ions
Všetečka, Tomáš ; Hajzler, Jan (referee) ; Novotný, Radoslav (advisor)
The bachelor thesis is focused on the influence of hydration of high-performance cementitious composites, more specifically reactive powder composites. Zinc ions were supplied by the compounds of zinc oxide and zinc sulphate heptahydrate. Zinc ions were added by weight content to cement at concentrations of 0.2; 0.5 and 1.0 wt. %. The development of properties depending on the content of zinc ions and the type of compound used was monitored in this work. The measured values were compared with reference values that did not contain zinc ions. The highest compressive strengths were obtained with a sample containing 1.0% Zn in the form of zinc oxide. However, this sample is associated with a longer setting time due to the retarding effect of zinc ions on hydration. The retardation effect was monitored using isothermal calorimetry. For samples containing zinc ions, a negative effect on the brass layer of steel fibers, which was used as reinforcement, was observed. Due to the addition of zinc ions, dezincification and subsequent removal of brass from the surface of the fibers took place. Therefore, these specimens had lower tensile strengths. A positive effect on the differential ballistic protection efficiency factor was observed for a sample containing 1% Zn in the form of zinc oxide.
|
|
|
Influence of calcium sulphate type on hydration of Portland cement
Šimčíková, Ivana ; Šiler, Pavel (referee) ; Šoukal, František (advisor)
My bachelor thesis deals with the study of the influence of calcium sulphate types on the hydration of Portland cement. Hydration is performed at 15 °C, 25 °C and 40 °C. In the theoretical part we find a description of the hydration of Portland cement and the influence of the type and amount of gypsum on the hydration period. The experimental part contains the preparation of samples for measurement and the principle of calorimetry including a description of the calorimetric curve. The data obtained from the calorimetric curve was processed into ternary diagrams for illustration. The diagrams show that the more calcium sulphate is soluble, the shorter the induction period, the times of reaching the minimum heat flow and heat flow at the maximum silicate peak will have. Further, the diagrams showed that as the amount of water in sulphate increases, so does the amount of hydration heat released.
|
|
|
Meta-talc Application in Inorganic Materials
Bednárek, Jan ; Rovnaník, Pavel (referee) ; Palou, Martin (referee) ; Havlica, Jaromír (advisor)
This thesis is focused at possibilities of preparation and characterization of XRD-amorphous delaminated and dehydroxylated talc phase – meta-talc, which can have its potential application and a starter material for a preparation of magnesium-silicate analogues of geopolymers. Changes in structure and morphology of talc ore were observed during this work. For the purposes of this research, two various talc ores – chloritic and dolomitic were examined. Whole process of meta-talc preparation was examined with whole scale of instrumental techniques such as X-ray diffraction, simultaneous thermogravimetric a differential thermal analysis, infrared spectroscopy, scanning electron microscopy or laser analysis of particle size. Meta-talc can be obtained via mechanochemical activation of talc ore with subsequent calcination. Mechanochemical treatment lead to destruction of original crystal structure and breaking of original bonds, i.e. the product of this treatment was almost amorphous and delaminated. Most of hydroxyl groups were converted to molecules of water which remained adsorbed or coordinated in ore structure. These molecules were removed during calcination step.
|
|
|
Rheology of Alkali-Activated Slag during Its Early Hydration Stages
Pazour, Miroslav ; Smilek, Jiří (referee) ; Bílek, Vlastimil (advisor)
This bachelor thesis focuses on the measurement of viscoelastic parameters of mixtures based on alkali-activated blast furnace slag during hydration. Hydration was monitored using isothermal calorimeter and initial and final setting time was determined for another comparsion by Vicat’s needle. These parameters were measured depending on activator dosage (water glass) and organic admixture dosage (hexylene glycol) and compared with each other. It was observed that storage modulus prevailed over loss modulus in fresh mixtures with lower dosage of activator, whereas in mixtures with higher dosage of activator viscous component began to prevail and complex modulus was rather descreasing. Conversely, in mixtures with higher hexylene glycol dosage complex modulus was significantly increasing. Evolution of modules in time correlated with calorimetric curves and setting times. During setting time, which is assigned to formation of primary C-A-S-H, values of viscoelastic parameters was remarkably increasing.
|
|
|
The influence of particle size and methods of preparation of calcium aluminate phases on their hydration
Ohaňka, Zdeněk ; Másilko, Jiří (referee) ; Koplík, Jan (advisor)
This work focuses on the hydration of four calcium aluminate phases – C3A, C12A7, CA and CA2. Above all, the influence of particle size and method of preparation on hydration behaviour were studied. Influence of these factors on hydration products were also investigated. Calcium aluminates were prepared by solid state synthesis and amorphous citrate method. Both methods were described in detail. The particle size was determined by laser diffraction. Isothermic calorimetry was used to investigate the process of hydration. Hydration products were identified by X-ray diffraction analysis and simultaneous thermogravimetric and differential thermal analysis.
|
guest ::
